Soham Techno Solutions

We offer APFC Panel up to 1000KVA Controlled thru Thyristor Cards or Contactor based depends on nature of Load. To overcome harmonic effects we use detuned Reactors. We supply the panels with APP / MPP Heavy duty capacitor Banks as per characteristics of electrical loads. We use microprocessor based APFC Relay up to 16 satges. As a special features you can monitor the APFC Relay output on computer. This panel is of great use to minimize loss and wastage of energy and heavy penalties by electricity boards. Our APFC panels are fully integrated with suitable APFC relay, switchgears, and capacitor banks to offer a complete solution to effectively eradicate lagging power factor

We offer Customized i6 Series Industrial UPS also tailored to your needs along with standard products.

Our three phase i6 Series Industrial UPS is specifically designed to provide secure power to Mission Critical Loads in Core and Non Core Industries as well as for Critical Data Processing Applications.

 

We serve entire gamut of Industries along with Commercial Establishments like Power, Oil & Gas, Steel & Metal, Cement, Fertilizer, Pharmaceutical, Textile, Chemical, Automotive, Plastic, Packaging, Aluminium, Water, FMCG, Hospital, Airports, Infrastructure Projects, IT, Medical Lab, Minerals, Mining, Paper, Printing, Railway, Sugar, Telecom, Engineering and other Light Industries. We also cater typical applications like Supporting Machine and Motor Loads and other 3 phase loads (fans, compressors etc.) that need Clean and Uninterrupted Power.

Three phase i6 series Industrial UPS has been designed to perform under extreme operating conditions that normally exist in industrial environments. The use of digital signal processors (DSP) has made the control loop of the UPS system very stable, drift free and with better HMI for monitoring, control and precise settings of parameters. High speed CAN bus interfaced sections make the system response very fast to handle the extreme transient load conditions. Intelligent power device with sandwich bus architecture makes the systems highly efficient and reliable

Additional Information:

• Delivery Time: 3-4 WEEK
• Packaging Details: WITH GOODS

The main purpose of the ACDB is to eliminate the operation of the load at the immediate PCU O/P end and also provide flexible operation of different loads like Street lights, general home or office lights and optional loads that optionally operated (On/Off). 

The ACDB box is made of epoxy powder coated metal casting. Three feeders are provided in ACDB with MCB of Required capacity installed at each feeder in the ACDB. One Electronic Energy Meter, ISI make, is provided in ACDB to measure the consumption of power from SPV Power Plant. 

A separate dedicated feeder from conventional line to PCU as well as ACDB is also provided. A separate change over switch of required capacity is provided in the ACDB to isolate the existing connected load from the solar system & switch it over to the existing convention power (Mains), in case of emergency. Similar way other boxes are used in Solar panel for different purposes.

Additional Information:

• Production Capacity: 3 phase
• Delivery Time: 20
• Packaging Details: with foam sheet

• Type: AMR Compatible Static, 3Ph,4Wire 240V (LTCT), 3 Ph,3 Wire(11KV) and 3 Ph, 4 Wire (33KV),CT/PT operated TriVector Energy Meter for Bulk Consumers
• Frequency: 50 Hz ± 5%
• Accuracy Class: 0.5S
• Voltage Rating: Suitable for operation from 240V Ph-N, 240 V LT CT (3P, 4W) 11KV/110V, Ph-Ph (3P,3W) 33KV/√3 /110V/√3, Ph-N (3P, 4W)
• Voltage Variation: (-) 30% to (+) 20%
• Basic Current (Ib) & Current Rating: Ib- 5A, Ratio : 200/5 A for LT CT(3P, 4W) Ib- 5A, Ratio : 50/5A for CT/PT operated (3P,3W) Ib- 5A & 1A, Ratio: 100/5 A and 100/1A for (3P, 4W)
• Maximum Continuous Current: As per IS14697:1999(2004)
• Starting Current: 0.1% of Ib at UPF
• Power Consumption: The active and apparent power consumption, in each voltage circuit, at reference voltage, reference temperature and reference frequency shall not exceed 1. 5 W and 8 VA. The apparent power taken by each current circuit, at basic current, reference frequency and reference temperature shall not exceed 1.0 VA.
• Power Factor: 0 Lag – Unity – 0 Lead 4
• Design: Meter shall be designed with application specific integrated circuit (ASIC) or micro controller; shall have no moving part; electronic components shall be assembled on printed circuit board using surface mounting technology; factory calibration using high accuracy (0.05 class) software based test bench. Assembly of electronic components shall be as per ANSI /IPCA-610 standard.

Additional Information:

• Production Capacity: 3 phase
• Delivery Time: 20
• Packaging Details: with foam sheet

We provides high quality automatic changeover panels – to enable automatic start-up of the standby generator and safe, fast transfer of the load in the event of a mains power cut. When mains power is restored, these changeover panels will automatically disconnect the generator and connect the load back to the mains.

We offer Feeder Section Pillar (FSP Panel) also known as Open Space Panels are manufactured using high grade M.S raw material and designed using advanced technology & Sturdy in construction, FSP are resistant to corrosion and feature proof age from water & weather. 

FSP (Feeder Section Pillar) are mainly used for providing connection to big switchgear or for distributing main power supply in a Residence Apartment & Commercial building. FSP used in cases where very heavy current passes through electrical equipments or in situations, which needs distribution of heavy current in a building. 

These panels are capable of accommodating electrical circuit breaker, pump controllers, lighting switches, stabilizers, UPS systems and many more.

Additional Information:

• Item Code: STSF
• Production Capacity: 415v
• Delivery Time: 15 days
• Packaging Details: Paking with foam sheet.